2018 Roosevelt Dime Coin Value: How Much Is It Worth?
Most 2018 Roosevelt dimes you pull from pocket change are worth face value — ten cents. In higher uncirculated grades, though, prices climb.
A guide estimate puts a 2018-P or 2018-D at about $2.50 in MS65, while the S clad proof sits around $6.26 in PR65 and the S silver proof near $10.69 in PR65. Matching your coin's mint, metal, and finish to the right branch matters before applying any price.
Fast Way to Identify Your 2018 Roosevelt Dime
Snap a clear photo of the front and back of your 2018 dime and upload both images. Our identifier can give you a preliminary read on the mintmark, finish type, and general version so you know which branch to research further.
It is not a substitute for professional authentication or precise grading, but it is a solid starting point.
2018 Roosevelt Dime Value
Upload both sides of your 2018 Roosevelt Dime.
Front Obverse
Upload photo
Back Reverse
Upload photo
Which 2018 Roosevelt Dime Versions Are Worth Money?
- 2018-P or 2018-D dimes in well-preserved mint state with fully separated torch bands can exceed face value, guided around $2.50 at MS65.
- 2018-S silver proofs, identified by their heavier 2.50 g weight and lack of a copper edge stripe, are guided near $10.69 at PR65.
- 2018-S silver reverse proof dimes from the 50th Anniversary set are a distinct issue from the ordinary silver proof, guided around $16 at PR65.
Step 1: Identify Your 2018 Roosevelt Dime Mint Mark and Version
Start with the basics: confirm the 2018 date, the Roosevelt portrait on the obverse, and the torch-with-branches design on the reverse. Then look left of the date for the mintmark — P for Philadelphia, D for Denver, or S for San Francisco.
The mintmark alone does not tell the whole story. San Francisco struck three distinct versions in 2018: a clad proof, a 90% silver proof, and a silver reverse proof issued in the 50th Anniversary set.
All three carry an S mintmark, so you need more than eyesight on the letter.
Weight separates clad from silver. A copper-nickel clad dime weighs 2.27 grams, while a 90% silver proof weighs 2.50 grams.
Both measure roughly 17.9 mm in diameter, so a scale is more useful than a ruler here.
Edge color helps too. Clad dimes show a visible copper-colored stripe along the edge; silver coins do not.
Combine edge color, weight, and original packaging — if you still have it — to pin down the exact version.
Step 2: Check Your 2018 Roosevelt Dime Grade
Focus on the high points first. Roosevelt's cheekbone, jawline, and the hair above the ear show wear before anything else.
On the reverse, inspect the torch bands and the leaf details on the branches.
Original mint luster is different from cleaning brightness. Genuine luster has a cartwheel effect when you tilt the coin under a light.
A cleaned coin looks uniformly shiny and often has fine hairlines visible under magnification.
Full Bands is a strike designation, not a grade. Both horizontal band pairs on the torch must show clear separation.
Weak bands can result from a soft strike rather than circulation wear, so do not automatically downgrade a coin just because the bands merge.
For proofs and reverse proofs, compare your coin against same-finish examples. The contrast between frosted and mirrored surfaces is an intentional manufacturing feature, and each finish type grades on its own curve.
Use the comparison image to gauge where your coin falls relative to established grade benchmarks.
Step 3: Check 2018 Roosevelt Dime Value by Mint and Version
2018 Roosevelt Dime — P Business Strike
The 2018-P dime was struck at Philadelphia for general circulation in copper-nickel clad, weighing 2.27 grams. Look for the small P mintmark to the left of the date.
A USA Coin Book guide estimate places this coin at about $2.50 in MS65.
In circulated condition, these are worth face value. What makes an individual piece more desirable is strong, fully separated horizontal bands on the torch — the Full Bands designation.
If your coin shows clean separation there and retains full original luster, it is worth a closer look.
Range Grade
Price Auction Records Appraisal PO PO 1
—
Coin Identifier FR FR 2
—
Coin Identifier AG AG 3
—
Coin Identifier G G 4
—
Coin Identifier
G 6
—
Coin Identifier VG VG 8
—
Coin Identifier
VG 10
—
Coin Identifier F F 12
—
Coin Identifier
F 15
—
Coin Identifier VF VF 20
—
Coin Identifier
VF 25
—
Coin Identifier
VF 30
—
Coin Identifier
VF 35
—
Coin Identifier XF XF 40
—
Coin Identifier
XF 45
—
Coin Identifier AU AU 50
—
Coin Identifier
AU 53
—
Coin Identifier
AU 55
—
Coin Identifier
AU 58
—
Coin Identifier MS MS 60
—
Coin Identifier
MS 61
—
Coin Identifier
MS 62
—
Coin Identifier
MS 63
—
Coin Identifier
MS 64
—
Coin Identifier
MS 65
—
Coin Identifier
MS 66
—
Coin Identifier
MS 67
—
Coin Identifier
MS 68
—
—
—
MS 69
—
—
—
MS 70
—
—
—
2018 Roosevelt Dime — D Business Strike
Denver's 2018-D dime is the same specification as its Philadelphia sibling: copper-nickel clad over a copper core at 2.27 grams. The D mintmark sits in the same spot, left of the date.
Guide value at MS65 is also about $2.50, matching the P issue. Circulated examples remain at ten cents.
As with the P mint, check for Full Bands separation on the torch — it is a strike quality indicator and can matter when the coin is otherwise in top condition.
Range Grade
Price Auction Records Appraisal PO PO 1
—
Coin Identifier FR FR 2
—
Coin Identifier AG AG 3
—
Coin Identifier G G 4
—
Coin Identifier
G 6
—
Coin Identifier VG VG 8
—
Coin Identifier
VG 10
—
Coin Identifier F F 12
—
Coin Identifier
F 15
—
Coin Identifier VF VF 20
—
Coin Identifier
VF 25
—
Coin Identifier
VF 30
—
Coin Identifier
VF 35
—
Coin Identifier XF XF 40
—
Coin Identifier
XF 45
—
Coin Identifier AU AU 50
—
Coin Identifier
AU 53
—
Coin Identifier
AU 55
—
Coin Identifier
AU 58
—
Coin Identifier MS MS 60
—
Coin Identifier
MS 61
—
Coin Identifier
MS 62
—
Coin Identifier
MS 63
—
Coin Identifier
MS 64
—
Coin Identifier
MS 65
—
Coin Identifier
MS 66
—
Coin Identifier
MS 67
—
—
—
MS 68
—
—
—
MS 69
—
—
—
MS 70
—
—
—
2018 Roosevelt Dime — S Clad Proof
The 2018-S clad proof was produced at San Francisco specifically for collectors. It uses the same copper-nickel clad composition and 2.27-gram weight as circulation strikes, but the mirrored fields and frosted devices are unmistakable.
A guide estimate from USA Coin Book puts this at roughly $6.26 in PR65. These typically came in official U.S. Mint proof sets.
Packaging and a visible copper edge stripe confirm the clad composition and distinguish this version from the silver proofs also bearing an S mintmark.
Range Grade
Price Auction Records Appraisal PR PR 1
—
Coin Identifier
PR 2
—
Coin Identifier
PR 3
—
Coin Identifier
PR 4
—
Coin Identifier
PR 6
—
Coin Identifier
PR 8
—
Coin Identifier
PR 10
—
Coin Identifier
PR 12
—
Coin Identifier
PR 15
—
Coin Identifier
PR 20
—
Coin Identifier
PR 25
—
Coin Identifier
PR 30
—
Coin Identifier
PR 35
—
Coin Identifier
PR 40
—
Coin Identifier
PR 45
—
Coin Identifier
PR 50
—
Coin Identifier
PR 53
—
Coin Identifier
PR 55
—
Coin Identifier
PR 58
—
Coin Identifier
PR 60
—
Coin Identifier
PR 61
—
Coin Identifier
PR 62
—
Coin Identifier
PR 63
—
Coin Identifier
PR 64
—
Coin Identifier
PR 65
—
Coin Identifier
PR 66
—
Coin Identifier
PR 67
—
Coin Identifier
PR 68
—
Coin Identifier
PR 69
—
Coin Identifier
PR 70
—
Coin Identifier
2018 Roosevelt Dime — S Silver Proof
San Francisco also struck a 90% silver proof dime in 2018. At 2.50 grams, it is heavier than the clad version, and the edge shows a uniform silver color with no copper stripe.
The guide estimate is approximately $10.69 at PR65 per USA Coin Book. Because both this coin and the clad proof carry the same S mintmark and look similar at a glance, weight is your best friend for a quick separation.
Original Mint packaging, if available, further confirms the silver composition.
Coin Value Lookup is a handy place to look up value guides for Roosevelt dimes and other U.S. coins when you need a quick reference organized by year and denomination.
Range Grade
Price Auction Records Appraisal PR PR 1
—
Coin Identifier
PR 2
—
Coin Identifier
PR 3
—
Coin Identifier
PR 4
—
Coin Identifier
PR 6
—
Coin Identifier
PR 8
—
Coin Identifier
PR 10
—
Coin Identifier
PR 12
—
Coin Identifier
PR 15
—
Coin Identifier
PR 20
—
Coin Identifier
PR 25
—
Coin Identifier
PR 30
—
Coin Identifier
PR 35
—
Coin Identifier
PR 40
—
Coin Identifier
PR 45
—
Coin Identifier
PR 50
—
Coin Identifier
PR 53
—
Coin Identifier
PR 55
—
Coin Identifier
PR 58
—
Coin Identifier
PR 60
—
Coin Identifier
PR 61
—
Coin Identifier
PR 62
—
Coin Identifier
PR 63
—
Coin Identifier
PR 64
—
Coin Identifier
PR 65
—
Coin Identifier
PR 66
—
Coin Identifier
PR 67
—
Coin Identifier
PR 68
—
Coin Identifier
PR 69
—
Coin Identifier
PR 70
—
Coin Identifier
2018 Roosevelt Dime — S Silver Reverse Proof
This is the special one from 2018. The silver reverse proof dime was issued as part of the 50th Anniversary Silver Reverse Proof Set, and it flips the usual proof appearance: the fields are frosted while the devices are mirrored, the opposite of a standard proof.
Composition is the same 90% silver at 2.50 grams. The S mintmark is present, just like the other San Francisco issues.
A guide estimate places it at about $16 in PR65, making it the highest-valued 2018 dime branch among the guide figures supplied.
Because mintmark, weight, and diameter match the standard silver proof, the visual finish difference is the key identifier. Original 50th Anniversary set packaging is the simplest confirmation.
Range Grade
Price Auction Records Appraisal PR PR 1
—
Coin Identifier
PR 2
—
Coin Identifier
PR 3
—
Coin Identifier
PR 4
—
Coin Identifier
PR 6
—
Coin Identifier
PR 8
—
Coin Identifier
PR 10
—
Coin Identifier
PR 12
—
Coin Identifier
PR 15
—
Coin Identifier
PR 20
—
Coin Identifier
PR 25
—
Coin Identifier
PR 30
—
Coin Identifier
PR 35
—
Coin Identifier
PR 40
—
Coin Identifier
PR 45
—
Coin Identifier
PR 50
—
Coin Identifier
PR 53
—
Coin Identifier
PR 55
—
Coin Identifier
PR 58
—
Coin Identifier
PR 60
—
Coin Identifier
PR 61
—
Coin Identifier
PR 62
—
Coin Identifier
PR 63
—
Coin Identifier
PR 64
—
Coin Identifier
PR 65
—
Coin Identifier
PR 66
—
Coin Identifier
PR 67
—
Coin Identifier
PR 68
—
Coin Identifier
PR 69
—
Coin Identifier
PR 70
—
Coin Identifier
2018 Roosevelt Dime Error List
1. 2018 Roosevelt Dime — Off-Center Strike
An off-center strike happens when the planchet is not properly seated between the dies at the moment of impact. The result is a displaced design with an unstruck crescent of blank metal along one edge.
For collectibility, you generally want the date still visible — that is the first thing buyers check.
The degree of displacement matters. A barely noticeable 2–3% shift is common and adds little.
Larger shifts with a readable date attract more attention. Condition, the percentage of off-center displacement, and whether the date is legible all factor into what a particular coin is worth.
Do not confuse an off-center strike with a clipped planchet, a one-sided die misalignment, or post-mint damage where someone flattened the coin after it left the Mint. A genuine off-center strike will show an even, unstruck crescent and a complete single impression of the remaining design.
2. 2018 Roosevelt Dime — Broadstrike
A broadstruck dime was struck without the retaining collar that normally constrains the planchet and forms the reeded edge. Without that collar, metal spreads outward, making the coin slightly larger than normal with a distorted or absent rim and smooth edge.
The full design is usually present, which is a key difference from an off-center strike where part of the design is missing entirely. Look at the edge profile: a broadstrike will lack proper reeding and show outward metal flow.
Condition and how dramatic the spread is affect value, but no specific price range is adopted here. Be careful not to confuse a broadstrike with a coin that was flattened or damaged after leaving the Mint.
Post-mint flattening typically shows uneven distortion and contact marks, while a genuine broadstrike has an even, radial spread from the center.
3. 2018 Roosevelt Dime — Die Crack / Die Chip
Die cracks and die chips are raised features on the coin's surface left by a deteriorating die. A die crack appears as a thin raised line, while a die chip shows up as a small raised blob where a piece of the die broke away.
When a crack extends from the interior design all the way to the rim, the resulting raised lump on the rim is sometimes called a cud.
These are worth distinguishing from post-mint scratches or surface corrosion. Die cracks and chips are raised above the field because they correspond to recesses in the broken die.
Scratches, by contrast, are incuse — they cut into the surface. Foreign material sitting on the coin can also mimic a raised feature but usually wipes away.
Value depends on the size, location, and visual impact of the crack or chip, along with overall coin condition. No specific price range is adopted for 2018 dime die cracks at this time.
