2021 Roosevelt Dime Coin Value: How Much Is It Worth?
Most 2021 Roosevelt dimes you pull from pocket change are worth face value — ten cents, no more. A USA Coin Book guide lists the Philadelphia and Denver business strikes at about $2.50 in MS65 condition.
The S clad proof sits around $3.08 in PR65, while the S silver proof comes in at roughly $14 in PR65. Sharper grades, pristine proofs and authenticated error coins deserve individual comparison.
Fast Way to Identify Your 2021 Roosevelt Dime
Want a quick read on what you have? Upload clear photos of both sides of your 2021 dime and our identifier will give you a preliminary look at the mint, version and finish.
It is not a substitute for professional authentication or grading, but it can point you in the right direction before you dig deeper.
2021 Roosevelt Dime Value
Upload both sides of your 2021 Roosevelt Dime.
Front Obverse
Upload photo
Back Reverse
Upload photo
Which 2021 Roosevelt Dime Versions Are Worth Money?
- Uncirculated 2021-P or 2021-D dimes with full original luster and sharply struck torch bands can exceed face value in certified mint-state grades.
- The 2021-S silver proof, struck in .999 fine silver, carries a PR65 guide value of about $14 — verify metal content by weight and edge appearance before assuming silver.
- A well-preserved 2021-S clad proof in its original packaging holds a modest premium over face value at around $3.08 in PR65.
Step 1: Identify Your 2021 Roosevelt Dime Mint Mark and Version
Start with the date. Confirm you see "2021" below Roosevelt's neck on the obverse.
The mintmark — P, D or S — sits just above the date. Philadelphia coins carry a P, Denver coins a D, and San Francisco proof issues an S.
All four versions share the same Roosevelt portrait obverse and torch-with-branches reverse. The difference is in how they were made and what they are made of.
P and D business strikes and the S clad proof are copper-nickel clad, weighing 2.27 grams with a diameter of about 17.9 mm. The S silver proof is .999 fine silver and weighs a nominal 2.537 grams.
That weight gap is small but measurable on a precision scale.
Do not assume any 2021 dime with an S mintmark is silver. San Francisco struck both clad and silver proofs that year.
Check the edge: a clad coin shows a visible layered band, while a silver coin has a uniform edge. Original government packaging also helps confirm metal content.
Weak detail on a business strike does not mean a missing mintmark or an error. Compare suspect coins carefully against known normal examples before jumping to conclusions.
Step 2: Check Your 2021 Roosevelt Dime Grade
Look at Roosevelt's cheek, jawline and the hair above his ear first. These high points lose detail before anything else.
On the reverse, check the torch bands and leaf veins.
Original luster matters more than shine. A coin that has been cleaned may look bright but will show fine hairlines under magnification.
That kind of surface damage lowers the grade.
Use the comparison image to match your coin's wear pattern against known grade levels. In mint state, you are looking at bag marks and contact from other coins, not actual wear from circulation.
Full Bands refers to clear separation of both horizontal torch band pairs. It is a strike characteristic, not an error, and it applies within a specific issue and grade context.
Proof coins are graded on their own PR scale. A proof is a special manufacturing finish with polished planchets and specially prepared dies — it is not simply a grade above mint state.
Judge proofs for hairlines, haze and contact marks rather than wear.
Step 3: Check 2021 Roosevelt Dime Value by Mint and Version
2021 Roosevelt Dime — P Business Strike
The 2021-P dime was struck at Philadelphia and carries a P mintmark on the obverse. It is copper-nickel clad over a copper core, weighing 2.27 grams.
In circulated condition, this coin spends at face value. The USA Coin Book guide lists it at about $2.50 in MS65, which means a well-preserved uncirculated example with minimal bag marks and good luster.
Sharp torch bands add appeal to collectors who track Full Bands designations.
This coin contains no silver — none at all. Match the exact mint and finish when looking up values.
Range Grade
Price Auction Records Appraisal PO PO 1
—
Coin Identifier FR FR 2
—
Coin Identifier AG AG 3
—
Coin Identifier G G 4
—
Coin Identifier
G 6
—
Coin Identifier VG VG 8
—
Coin Identifier
VG 10
—
Coin Identifier F F 12
—
Coin Identifier
F 15
—
Coin Identifier VF VF 20
—
Coin Identifier
VF 25
—
Coin Identifier
VF 30
—
Coin Identifier
VF 35
—
Coin Identifier XF XF 40
—
Coin Identifier
XF 45
—
Coin Identifier AU AU 50
—
Coin Identifier
AU 53
—
Coin Identifier
AU 55
—
Coin Identifier
AU 58
—
Coin Identifier MS MS 60
—
Coin Identifier
MS 61
—
Coin Identifier
MS 62
—
Coin Identifier
MS 63
—
Coin Identifier
MS 64
—
Coin Identifier
MS 65
—
Coin Identifier
MS 66
—
Coin Identifier
MS 67
—
Coin Identifier
MS 68
—
Coin Identifier
MS 69
—
—
—
MS 70
—
—
—
2021 Roosevelt Dime — D Business Strike
Denver's 2021-D dime is the same composition and weight as its Philadelphia sibling: copper-nickel clad over a copper core at 2.27 grams. The D mintmark sits above the date on the obverse.
Guide value in MS65 is about $2.50 per USA Coin Book. Circulated examples are ordinary spenders.
If yours shows full original mint luster with clean surfaces and well-separated torch bands, it may be worth setting aside for a collection rather than tossing back into the change jar.
Range Grade
Price Auction Records Appraisal PO PO 1
—
Coin Identifier FR FR 2
—
Coin Identifier AG AG 3
—
Coin Identifier G G 4
—
Coin Identifier
G 6
—
Coin Identifier VG VG 8
—
Coin Identifier
VG 10
—
Coin Identifier F F 12
—
Coin Identifier
F 15
—
Coin Identifier VF VF 20
—
Coin Identifier
VF 25
—
Coin Identifier
VF 30
—
Coin Identifier
VF 35
—
Coin Identifier XF XF 40
—
Coin Identifier
XF 45
—
Coin Identifier AU AU 50
—
Coin Identifier
AU 53
—
Coin Identifier
AU 55
—
Coin Identifier
AU 58
—
Coin Identifier MS MS 60
—
Coin Identifier
MS 61
—
Coin Identifier
MS 62
—
Coin Identifier
MS 63
—
Coin Identifier
MS 64
—
Coin Identifier
MS 65
—
Coin Identifier
MS 66
—
Coin Identifier
MS 67
—
Coin Identifier
MS 68
—
Coin Identifier
MS 69
—
—
—
MS 70
—
—
—
2021 Roosevelt Dime — S Clad Proof
San Francisco produced a clad proof dime in 2021 with an S mintmark. This coin is copper-nickel clad over a copper core — the same metals as a regular business strike — but struck with polished dies on prepared planchets for a mirror-like finish.
The USA Coin Book guide places it at about $3.08 in PR65. That is a small premium over face value, so condition and original packaging matter if you are looking to sell.
Do not confuse this with the silver proof. Same mint, same mintmark, different metal.
Weigh it: 2.27 grams means clad, not silver. The edge will also show a visible clad layer sandwich.
Range Grade
Price Auction Records Appraisal PR PR 1
—
Coin Identifier
PR 2
—
Coin Identifier
PR 3
—
Coin Identifier
PR 4
—
Coin Identifier
PR 6
—
Coin Identifier
PR 8
—
Coin Identifier
PR 10
—
Coin Identifier
PR 12
—
Coin Identifier
PR 15
—
Coin Identifier
PR 20
—
Coin Identifier
PR 25
—
Coin Identifier
PR 30
—
Coin Identifier
PR 35
—
Coin Identifier
PR 40
—
Coin Identifier
PR 45
—
Coin Identifier
PR 50
—
Coin Identifier
PR 53
—
Coin Identifier
PR 55
—
Coin Identifier
PR 58
—
Coin Identifier
PR 60
—
Coin Identifier
PR 61
—
Coin Identifier
PR 62
—
Coin Identifier
PR 63
—
Coin Identifier
PR 64
—
Coin Identifier
PR 65
—
Coin Identifier
PR 66
—
Coin Identifier
PR 67
—
Coin Identifier
PR 68
—
Coin Identifier
PR 69
—
Coin Identifier
PR 70
—
Coin Identifier
2021 Roosevelt Dime — S Silver Proof
The 2021-S silver proof dime is struck in .999 fine silver, not the older 90% silver composition used before 2019. It weighs a nominal 2.537 grams compared to 2.27 grams for the clad version.
USA Coin Book lists this at about $14 in PR65. That silver content gives it an inherent precious-metal floor, and the proof finish adds collector appeal on top.
To confirm you have one, weigh it on a scale accurate to at least 0.01 grams and examine the edge for a uniform silver color rather than a layered sandwich. Original Mint packaging is the easiest confirmation.
The .999 purity is a meaningful shift from the pre-2019 standard, so do not use older silver-proof weight specifications when checking.
Coin Value Lookup is a good starting point if you want to look up guides for other Roosevelt dime years or denominations while you are sorting through your coins.
Range Grade
Price Auction Records Appraisal PR PR 1
—
Coin Identifier
PR 2
—
Coin Identifier
PR 3
—
Coin Identifier
PR 4
—
Coin Identifier
PR 6
—
Coin Identifier
PR 8
—
Coin Identifier
PR 10
—
Coin Identifier
PR 12
—
Coin Identifier
PR 15
—
Coin Identifier
PR 20
—
Coin Identifier
PR 25
—
Coin Identifier
PR 30
—
Coin Identifier
PR 35
—
Coin Identifier
PR 40
—
Coin Identifier
PR 45
—
Coin Identifier
PR 50
—
Coin Identifier
PR 53
—
Coin Identifier
PR 55
—
Coin Identifier
PR 58
—
Coin Identifier
PR 60
—
Coin Identifier
PR 61
—
Coin Identifier
PR 62
—
Coin Identifier
PR 63
—
Coin Identifier
PR 64
—
Coin Identifier
PR 65
—
Coin Identifier
PR 66
—
Coin Identifier
PR 67
—
Coin Identifier
PR 68
—
Coin Identifier
PR 69
—
Coin Identifier
PR 70
—
Coin Identifier
2021 Roosevelt Dime Error List
1. 2021 Roosevelt Dime — Clashed Dies
A die clash happens when the obverse and reverse dies strike each other without a planchet between them, transferring ghost images of the opposing design onto each die. On a 2021 dime with this error, you would see faint outlines of Roosevelt's features on the reverse or torch elements on the obverse — impressions that do not belong.
These ghost traces follow predictable locations because the dies meet in a fixed alignment. Random scratches or raised lines that do not correspond to the opposing design are not die clashes.
The value of a clashed-die 2021 dime depends on how visible the transferred design is, the coin's overall condition, and which surfaces are affected. Individual assessment by a knowledgeable grader is the right approach here.
2. 2021 Roosevelt Dime — Struck-Through Error
A struck-through error occurs when foreign material — grease, a metal fragment, a thread — gets caught between the die and the planchet during striking. The result is a localized depression or incomplete area in the design where the obstruction blocked the die's impression.
On a 2021 dime, look for a smooth recessed area, an impression of a foreign object, or a patch of missing detail that does not match normal die wear. Grease-filled errors tend to leave soft, rounded depressions, while retained-object strikes may show sharper outlines.
Do not confuse this with ordinary wear, cleaning damage or a weakly struck area from a tired die. Value depends on the size of the affected area, the type of obstruction and the coin's preservation.
Each piece needs individual evaluation.
3. 2021 Roosevelt Dime — Die Crack / Die Chip
Die cracks and die chips are raised features on a 2021 dime caused by a fracturing die. A crack appears as a thin raised line running across the design.
A chip shows up as a small raised blob where a piece of the die face broke away, leaving a void that filled with metal during striking.
A cud is a specific type of die break connected to the rim, producing a larger raised area. Interior chips are usually smaller and less dramatic.
To avoid misidentification, remember these features are raised. Incuse scratches, corrosion pits and stuck-on foreign material sit into or on top of the surface rather than rising from it.
The value of die-crack and die-chip errors on a 2021 dime depends on their size, location and the coin's overall grade.
4. 2021 Roosevelt Dime — Clipped Planchet
A clipped planchet means the blank was improperly punched from the metal strip before striking, resulting in a missing section. On a 2021 dime, this shows up as a curved, straight or irregular absence along the edge, and you may notice design weakness on the opposite side of the coin where metal could not flow fully during the strike.
The edge texture at the clip should look natural — not filed or cut. A genuine clip also often produces a characteristic area of weakness called the Blakesley effect directly opposite the missing portion.
Filed notches, deliberate edge cuts and corrosion damage are common lookalikes. Value depends on the clip's size, shape and the coin's remaining condition.
Professional authentication is the surest confirmation.
5. 2021 Roosevelt Dime — Doubled Die Reverse
A doubled die reverse on a 2021 dime involves a misalignment during the die-making process that leaves doubled impressions in the reverse design. Look at the lettering in UNITED STATES OF AMERICA, E PLURIBUS UNUM, and ONE DIME, as well as the torch and branch outlines.
Genuine doubling shows consistent separation or notching in the affected elements. Compare your coin side by side with a normal 2021 dime under the same lighting.
Machine doubling — a much more common and far less valuable occurrence — produces a flat, shelf-like displacement rather than the rounded, distinct separation of a true doubled die. Reflections and photographic artifacts can also mimic doubling in images.
Value depends on the doubling's visibility and the coin's preservation.
6. 2021 Roosevelt Dime — Doubled Die Obverse
A doubled die obverse on a 2021 dime results from a misalignment during die production, creating doubled impressions on the obverse. Check the letters in LIBERTY, IN GOD WE TRUST and the date, as well as Roosevelt's profile details.
True hub doubling produces consistent, rounded separation or notching rather than a flat shelf. Machine doubling — which is common and adds little to no premium — creates a flat displaced image, often with a slightly different texture than the surrounding surface.
Examine the coin under consistent lighting and compare it directly against a known normal example. Worn die contours can also blur letter edges in ways that mimic doubling to an untrained eye.
The value of a DDO depends on the strength and location of the doubling plus the coin's condition.
7. 2021 Roosevelt Dime — Finned Rim
A finned rim is a thin, blade-like extension of metal at the rim of a coin, caused by excess metal being forced into a small gap between the die and the collar during striking. On a 2021 dime, check the rim from a face-on view and then tilt the coin to see the edge profile.
A genuine fin is uniform and follows the rim's curvature. It differs from a bent rim, which shows distortion of the existing rim rather than extra metal.
Filed edges and post-strike damage from being squeezed will have tool marks or irregular surfaces.
The extent and continuity of the fin, along with the coin's overall condition, determine its collector interest. Each finned-rim coin needs individual assessment.
8. 2021 Roosevelt Dime — Missing Clad Layer
A missing clad layer error means one of the outer copper-nickel layers was absent from the planchet before striking. On a 2021 dime, the affected side may appear a different color — potentially showing the copper core — and the coin will weigh noticeably less than the standard 2.27 grams.
Compare both faces and the edge against a normal clad dime. A normal edge shows distinct layers; a missing-clad coin will look different on the affected side's edge band.
Toning, corrosion, environmental damage and deliberate plating removal can all mimic this error visually. A precise weight measurement is your best first screen.
Value depends on which layer is missing, the visual impact and the coin's condition.
9. 2021 Roosevelt Dime — Off-Center Strike
An off-center strike occurs when the planchet is not properly seated between the dies, so the design is displaced and part of the blank remains unstruck. On a 2021 dime, this creates a crescent-shaped blank area with the design shifted to one side.
The percentage of off-center displacement and whether the date remains visible are the two biggest factors in collector interest. A coin with the date intact and a significant percentage of off-center displacement draws the most attention.
Do not confuse this with a clipped planchet, which removes part of the blank before striking, or with one-sided misalignment, where the full planchet is covered but the design is shifted. Post-mint flattening or damage can also create misleading shapes.
Each off-center coin requires individual evaluation.
