2022 Roosevelt Dime Coin Value: How Much Is It Worth?
Most 2022 Roosevelt dimes you pull from pocket change are worth exactly ten cents. A USA Coin Book guide lists the P or D business strike at about $2.50 in MS65 condition, the S clad proof at $3.08 in PR65, and the S silver proof at $14 in PR65.
Sharper grades, verified silver content, or individually authenticated errors may change that picture.
Fast Way to Identify Your 2022 Roosevelt Dime
Snap clear photos of both sides of your 2022 dime and upload them here for a preliminary identification. Good lighting and a steady hand help — try to capture the mintmark below the date and the torch detail on the reverse.
This step can help you figure out which version you have before diving deeper.
2022 Roosevelt Dime Value
Upload both sides of your 2022 Roosevelt Dime.
Front Obverse
Upload photo
Back Reverse
Upload photo
Which 2022 Roosevelt Dime Versions Are Worth Money?
- Uncirculated P or D examples with full original luster and sharp torch bands — guide value around $2.50 at MS65, with higher grades potentially worth more.
- The 2022-S silver proof, struck in .999 fine silver, carries a PR65 guide value of $14 — verify by weight (2.537 g) and edge appearance.
- Well-preserved S clad proofs with clean mirrored fields, guided at $3.08 in PR65.
Step 1: Identify Your 2022 Roosevelt Dime Mint Mark and Version
Start with the date. Confirm it reads 2022 on the obverse, beneath Roosevelt's portrait.
Then find the mintmark, also on the obverse — it sits just above the date. A "P" means Philadelphia, a "D" means Denver, and an "S" means San Francisco.
Philadelphia and Denver strikes are business-strike coins made for circulation. They are copper-nickel clad over a copper core and weigh 2.27 grams.
The diameter is about 17.9 mm.
San Francisco produced two different proofs for 2022. The clad proof uses the same copper-nickel clad composition and weighs 2.27 grams.
The silver proof is .999 fine silver and has a nominal weight of 2.537 grams. That weight difference is your best quick test.
Do not assume a proof is silver just because it looks shiny or carries an S mintmark. Check the edge — a clad coin shows a visible layered stripe.
A .999 silver proof will not. Weigh the coin on a precise scale if you can.
Weak detail on a business strike does not mean it is missing a mintmark or has an error; sometimes dies just wear down.
Step 2: Check Your 2022 Roosevelt Dime Grade
Look at Roosevelt's cheek and jawline first. Those high points lose detail before anything else.
On a well-preserved coin, the hair strands behind the ear stay sharp and distinct.
Flip to the reverse and examine the torch. Both pairs of horizontal bands across the torch should show clear separation on a strong strike.
This is what collectors call "Full Bands," and it applies to business strikes and proofs alike — though you should only compare Full Bands within the same mint and finish.
Original luster matters more than raw shininess. A coin that has been cleaned might look bright but will show hairline scratches under magnification.
Use the comparison image to gauge where your coin falls.
Proof is a manufacturing finish with mirrored fields and frosted devices. It is not a grade above Mint State.
A proof can still have contact marks or haze that lower its numeric grade. Scratches, corrosion, and post-mint damage are not Mint errors, no matter how unusual they look.
Step 3: Check 2022 Roosevelt Dime Value by Mint and Version
2022 Roosevelt Dime — P Business Strike
The 2022-P Roosevelt dime was struck at Philadelphia for general circulation. It is copper-nickel clad over a copper core, weighs 2.27 grams, and carries a "P" mintmark on the obverse above the date.
A USA Coin Book guide places this coin at about $2.50 in MS65 condition. That is a coin with full mint luster and only minor contact marks visible under magnification.
Most circulated examples are worth face value. Look for sharp torch bands and clean, original surfaces if you are hoping for a keeper.
Range Grade
Price Auction Records Appraisal PO PO 1
—
Coin Identifier FR FR 2
—
Coin Identifier AG AG 3
—
Coin Identifier G G 4
—
Coin Identifier
G 6
—
Coin Identifier VG VG 8
—
Coin Identifier
VG 10
—
Coin Identifier F F 12
—
Coin Identifier
F 15
—
Coin Identifier VF VF 20
—
Coin Identifier
VF 25
—
Coin Identifier
VF 30
—
Coin Identifier
VF 35
—
Coin Identifier XF XF 40
—
Coin Identifier
XF 45
—
Coin Identifier AU AU 50
—
Coin Identifier
AU 53
—
Coin Identifier
AU 55
—
Coin Identifier
AU 58
—
Coin Identifier MS MS 60
—
Coin Identifier
MS 61
—
Coin Identifier
MS 62
—
Coin Identifier
MS 63
—
Coin Identifier
MS 64
—
Coin Identifier
MS 65
—
Coin Identifier
MS 66
—
Coin Identifier
MS 67
—
Coin Identifier
MS 68
—
Coin Identifier
MS 69
—
—
—
MS 70
—
—
—
2022 Roosevelt Dime — D Business Strike
Denver's 2022-D dime is the same composition and weight as its Philadelphia sibling — copper-nickel clad, 2.27 grams. The "D" mintmark sits on the obverse above the date.
The USA Coin Book guide also lists this at about $2.50 in MS65. As with the P mint, circulated pieces are common ten-cent coins.
What sets an MS65 apart is unbroken luster across both fields, no distracting bag marks, and clean torch bands on the reverse.
Coin Value Lookup is a good starting point if you want to compare this dime's value with other dates and denominations in the Roosevelt series.
Range Grade
Price Auction Records Appraisal PO PO 1
—
Coin Identifier FR FR 2
—
Coin Identifier AG AG 3
—
Coin Identifier G G 4
—
Coin Identifier
G 6
—
Coin Identifier VG VG 8
—
Coin Identifier
VG 10
—
Coin Identifier F F 12
—
Coin Identifier
F 15
—
Coin Identifier VF VF 20
—
Coin Identifier
VF 25
—
Coin Identifier
VF 30
—
Coin Identifier
VF 35
—
Coin Identifier XF XF 40
—
Coin Identifier
XF 45
—
Coin Identifier AU AU 50
—
Coin Identifier
AU 53
—
Coin Identifier
AU 55
—
Coin Identifier
AU 58
—
Coin Identifier MS MS 60
—
Coin Identifier
MS 61
—
Coin Identifier
MS 62
—
Coin Identifier
MS 63
—
Coin Identifier
MS 64
—
Coin Identifier
MS 65
—
Coin Identifier
MS 66
—
—
—
MS 67
—
—
—
MS 68
—
—
—
MS 69
—
—
—
MS 70
—
—
—
2022 Roosevelt Dime — S Clad Proof
The 2022-S clad proof was made at San Francisco for collectors, not for circulation. It uses the same copper-nickel clad composition as business strikes and weighs 2.27 grams.
The mirrored fields and frosted portrait are hallmarks of the proof finish.
A USA Coin Book guide lists this version at about $3.08 in PR65. These coins typically come in sealed Mint packaging.
An S mintmark alone does not mean silver — check the edge for the telltale clad stripe and confirm the weight. Proof finish is about how the coin was made, not a higher rank than Mint State.
Range Grade
Price Auction Records Appraisal PR PR 1
—
Coin Identifier
PR 2
—
Coin Identifier
PR 3
—
Coin Identifier
PR 4
—
Coin Identifier
PR 6
—
Coin Identifier
PR 8
—
Coin Identifier
PR 10
—
Coin Identifier
PR 12
—
Coin Identifier
PR 15
—
Coin Identifier
PR 20
—
Coin Identifier
PR 25
—
Coin Identifier
PR 30
—
Coin Identifier
PR 35
—
Coin Identifier
PR 40
—
Coin Identifier
PR 45
—
Coin Identifier
PR 50
—
Coin Identifier
PR 53
—
Coin Identifier
PR 55
—
Coin Identifier
PR 58
—
Coin Identifier
PR 60
—
Coin Identifier
PR 61
—
Coin Identifier
PR 62
—
Coin Identifier
PR 63
—
Coin Identifier
PR 64
—
Coin Identifier
PR 65
—
Coin Identifier
PR 66
—
Coin Identifier
PR 67
—
Coin Identifier
PR 68
—
Coin Identifier
PR 69
—
Coin Identifier
PR 70
—
Coin Identifier
2022 Roosevelt Dime — S Silver Proof
This is the premium version. The 2022-S silver proof is struck on a .999 fine silver planchet with a nominal weight of 2.537 grams — noticeably heavier than the 2.27-gram clad issues.
The edge will appear uniformly silver-toned with no copper stripe.
A USA Coin Book guide places the PR65 value at $14. That makes it the highest-valued regular issue among the four 2022 dime versions at comparable grade levels.
Since 2019, the Mint has used .999 fine silver for these proofs instead of the older 90% silver composition — do not confuse the two specs if you are cross-referencing older references. Original government packaging helps confirm authenticity.
Range Grade
Price Auction Records Appraisal PR PR 1
—
Coin Identifier
PR 2
—
Coin Identifier
PR 3
—
Coin Identifier
PR 4
—
Coin Identifier
PR 6
—
Coin Identifier
PR 8
—
Coin Identifier
PR 10
—
Coin Identifier
PR 12
—
Coin Identifier
PR 15
—
Coin Identifier
PR 20
—
Coin Identifier
PR 25
—
Coin Identifier
PR 30
—
Coin Identifier
PR 35
—
Coin Identifier
PR 40
—
Coin Identifier
PR 45
—
Coin Identifier
PR 50
—
Coin Identifier
PR 53
—
Coin Identifier
PR 55
—
Coin Identifier
PR 58
—
Coin Identifier
PR 60
—
Coin Identifier
PR 61
—
Coin Identifier
PR 62
—
Coin Identifier
PR 63
—
Coin Identifier
PR 64
—
Coin Identifier
PR 65
—
Coin Identifier
PR 66
—
Coin Identifier
PR 67
—
Coin Identifier
PR 68
—
Coin Identifier
PR 69
—
Coin Identifier
PR 70
—
Coin Identifier
2022 Roosevelt Dime Error List
1. 2022 Roosevelt Dime — Die Crack / Die Chip
Die cracks and die chips have been reported on 2022 Roosevelt dimes, including a "blob on nose" variety caused by a small piece of the die breaking away. The result is a raised lump of metal on Roosevelt's nose, distinct from the normal portrait contour.
To identify one, look for a small raised blob that is the same color and texture as the surrounding coin surface. It should appear in the same spot on multiple coins struck from the same die.
Incuse scratches, corrosion deposits, or glue residue sit in the surface rather than rising above it — those are not die chips. Condition, size, and visibility of the chip all affect what a particular coin might bring.
Individual assessment by a grading service is the reliable path to establishing value.
2. 2022 Roosevelt Dime — Doubled Die Obverse
Doubled die obverse errors have been reported for the 2022 dime. A genuine doubled die shows consistent separation or notching on obverse design elements — letters, the date, or Roosevelt's profile — visible under low magnification.
Compare your coin to a normal 2022 dime under the same lighting. The doubling should appear as a second, slightly offset impression with depth and definition, not a flat shelf.
Machine doubling, which is far more common, tends to produce a shelf-like flattening on one side of a letter with reduced detail. Reflections and worn die contours can also mimic doubling to the naked eye.
The specific error's value depends on how dramatic and clear the doubling is, the coin's overall condition, and independent authentication.
3. 2022 Roosevelt Dime — Doubled Die Reverse
Doubled die reverse varieties have also been reported for the 2022 Roosevelt dime. On the reverse, check the lettering around "UNITED STATES OF AMERICA" and "ONE DIME," as well as the torch and branch contours, for consistent offset doubling.
A real doubled die reverse will show the same separation pattern across multiple elements struck from that die. Machine doubling is the most common lookalike — it produces flat, shelf-like distortion rather than a clearly separated second image.
Random nicks, scratches, and die deterioration can also fool you. Use a loupe and compare directly against a confirmed normal coin.
Value depends on the strength and location of the doubling, plus the coin's preservation and third-party authentication.
4. 2022 Roosevelt Dime — Off-Center Strike
Off-center strikes occur when the planchet is not properly seated in the collar before the dies come together. The result is a design that is shifted to one side, leaving a blank crescent of unstruck metal on the opposite edge.
The percentage of off-center displacement matters a lot. A barely noticeable 2–3% shift is not worth much.
A dramatic 10%+ shift with the full date still visible is where collector interest starts. Look at the entire rim — the design should trail off gradually into blank metal, not show signs of post-mint damage like vise marks or deliberate flattening.
A clipped planchet or a misaligned die can look superficially similar. Value depends on the degree of the shift, date visibility, and the coin's condition.
5. 2022 Roosevelt Dime — Clipped Planchet
Clipped planchet errors happen when the blank is punched incorrectly from the metal strip, resulting in a missing section. On a 2022 dime, look for a curved, straight, or ragged absence of metal along the edge.
A genuine clip often shows a slight weakness in the design opposite the missing area, called the Blakesley effect. The metal at the clip boundary should look smooth and consistent with the rest of the coin's edge texture — not rough, filed, or discolored.
Post-mint damage like vice cuts or deliberate filing will leave tool marks and sharp, unnatural edges. Corrosion eating away part of the rim is another common lookalike.
The size and type of clip, along with the coin's overall condition, determine collector interest and value.
6. 2022 Roosevelt Dime — Wrong Planchet / Off-Metal Strike
A wrong planchet error means a 2022 dime die struck a blank intended for a different denomination or even a different country's coin. These are scarce and dramatic — the coin's weight, diameter, edge, and design completeness will all differ from a normal 2.27-gram clad dime.
To investigate, weigh the coin on a scale accurate to at least 0.1 grams and measure the diameter. Compare both numbers against known planchet specifications.
If the design is incomplete or the coin looks oddly thick or thin, that is a clue. However, plated coins, acid-treated coins, and deliberately altered pieces are far more common than genuine wrong-planchet strikes.
Discoloration alone is not proof. Authentication by a third-party grading service is essentially required to establish this type of error.
7. 2022 Roosevelt Dime — Clashed Dies
Clashed dies happen when the obverse and reverse dies strike each other without a planchet between them. The impact transfers faint traces of each die's design onto the other.
On a 2022 dime, you might see ghost-like outlines of the torch or branches on the obverse, or traces of Roosevelt's profile on the reverse.
These transferred impressions should align with where the opposite die's features would naturally contact. Random scratches, raised lines from die polish, or marks from a brockage will not line up this way.
Use angled lighting and a loupe to look for the characteristic mirror-image pattern. The clarity and size of the clash, the coin's condition, and independent authentication all factor into what a clashed die dime might be worth.
8. 2022 Roosevelt Dime — Struck-Through Error
Struck-through errors occur when foreign material — often grease — sits between the die and the planchet during striking. On a 2022 dime, this typically appears as a localized area of missing or weakened detail, sometimes with a smooth, filled-in look where the design should be sharp.
Grease-filled dies are the most common type. The affected area will have a distinctly different texture from normal wear — it looks mushy or flat rather than gradually worn.
A retained foreign object (like a thread or metal fragment) leaves an impression or may still be embedded. Ordinary weak strikes from a tired die, general circulation wear, or cleaning damage can all mimic struck-through errors.
The size of the affected area, its location, and overall coin condition determine collector interest.
9. 2022 Roosevelt Dime — Broadstrike
A broadstrike happens when the collar die — the ring that constrains the planchet during striking — fails to engage. Without that collar, the metal spreads outward freely, producing a coin that is wider than normal with no raised rim or reeded edge.
The entire design should still be present and roughly centered, which distinguishes a broadstrike from an off-center strike. The edge profile will look flat and spread rather than sharply defined.
Check that the expansion appears uniform and metallic — a coin that was flattened after minting (by a train, a hammer, or a rolling machine) may look similar but usually shows distorted lettering and uneven thickness. Value depends on how dramatic the spread is, the coin's condition, and authentication by a recognized grading service.
